Emergency?
Contact Us
Contact Us
Heating Solutions Perth: Installation, Maintenance, Repairs and Servicing
Western Australian winters are short, but they’re sharp. Overnight temperatures in the Hills and outer suburbs regularly drop low enough to make an under-heated home genuinely uncomfortable, and older properties with limited insulation often struggle to hold warmth even during the day. A well-designed heating system makes that difference disappear — and keeps running costs reasonable rather than spiralling through the colder months.
Our team designs, installs, services, and repairs heating systems for residential, commercial, and industrial properties across the metro area. Whether you’re after a single heater for one room, a full ducted system for a whole home, or ongoing maintenance for equipment that’s already in place, we work to the same standard: get the sizing right, install it properly, and keep it running reliably for years.
Why a Properly Designed Heating System Matters
An indoor climate setup that’s undersized for the space runs constantly and still leaves rooms feeling cold. Heating that’s oversized cycles on and off too frequently, which wastes energy and puts unnecessary wear on components. Getting the balance right depends on calculating actual heat loss for the property — based on insulation, window size and orientation, ceiling height, and how exposed the building is to wind and cold air.
This matters just as much for installation quality as it does for equipment choice. Poorly sealed ductwork, incorrect gas connections, or badly positioned units can all undermine an otherwise good system, leading to uneven warmth, higher bills, or safety issues that show up later rather than immediately.
Types of Heating Systems We Install
A ducted gas system distributes warm air through ceiling or floor ducts to multiple rooms from a single central unit. It's a popular option for larger homes because it heats the whole property evenly and can be zoned so unused rooms aren't heated unnecessarily, helping control running costs.
Many properties already have reverse-cycle air conditioning capable of heating as well as cooling, making it a practical year-round solution. Where a new solution is being installed for both heating and cooling, reverse-cycle equipment is often the most efficient option, particularly for moderate WA winters.
For smaller homes, units, or properties where ducted infrastructure isn't practical, a gas wall furnace or fixed space heater can warm a specific room or living area efficiently without the cost of a full ducted installation.
Hydronic solutions circulate heated water through panels or in-floor piping, providing a steady, even warmth without blowing air around the room. It suits properties where allergy concerns or air movement are a consideration, though it generally involves a higher upfront installation cost.
Offices, warehouses, retail spaces, and other commercial premises have different heating demands depending on occupancy, ceiling height, and how the space is used. We design commercial heating installations around those practical factors, working with business owners and facility managers to limit disruption during the install.
Our Installation Process
We assess the property's size, insulation, window orientation, and existing infrastructure to calculate actual heat loss rather than estimating based on floor area alone.
Based on that assessment, we recommend equipment suited to the property and budget, explaining the differences between options like ducted gas, reverse-cycle, and hydronic systems.
Every quote is itemised, covering equipment, labour, and any additional work such as gas connections, electrical upgrades, or ductwork.
Our licensed technicians complete the installation to manufacturer specifications and Australian Standards, including gas fitting where required.
Once installed, we test the unit fully and walk through the controls before considering the job complete.
Servicing and Maintenance
Regular servicing keeps a heating system running efficiently and safely, and it’s particularly important for gas solutions, where issues can have safety implications beyond just comfort or running costs. A typical service includes checking and cleaning components, inspecting gas connections and ventilation for safety, testing ignition and burner function, checking ductwork for leaks or damage, and confirming thermostat or control accuracy.
We recommend servicing indoor climate setup equipment at least once a year, ideally before winter sets in. For ducted gas solutions specifically, an annual safety check is a sensible precaution given the equipment involved.
Comfort Starts With The Right System
From installation and repairs to ongoing maintenance, we provide reliable heating, ventilation and air conditioning solutions designed for Perth homes and businesses.
Repairs
If a system isn’t controlling the climate effectively, is making unusual noises, has stopped responding to controls, or has a suspected gas issue, our technicians can diagnose and repair the fault. Common issues include:
Gas-related repairs should always be handled by a licensed technician, and we treat any reported gas smell or suspected leak as an urgent callout.
New Builds and Renovations
For new homes or major renovations, indoor climate setup is best planned alongside cooling infrastructure before walls and ceilings are closed in. We work with builders and homeowners during the design phase to plan ductwork, zoning, and unit placement properly, avoiding the cost and disruption of retrofitting later.
Preventative Maintenance Programs
For commercial clients or homeowners who’d rather not manage scheduling themselves, we offer maintenance programs that check indoor climate setup equipment before winter each year. This reduces the risk of a breakdown during the coldest weeks and helps extend the working life of the system.
Why Choose Our Team
We offer end-to-end HVAC services for residential, commercial, and industrial clients across Perth.
We calculate actual heat loss rather than estimating, leading to better comfort and lower running costs.
We'll suggest the option that suits your property and budget, not the most expensive equipment available.
All installations and gas work are completed by qualified tradespeople to Australian Standards.
Quotes are itemised and explained clearly before any work begins.
We're available for servicing and repairs long after installation, so equipment stays reliable for years.
Get a Free Quote
Whether you need a new heating system installed, an existing one serviced, or a fault repaired, our team can assess your property and recommend the right solution. Contact us today for a free, no-obligation quote.
Frequently Asked Questions
Cost depends on the type of solution, the size of the property, and any additional work required, such as gas connections or ductwork. Ducted solutions generally cost more upfront than a single wall furnace or space heater, but heat a larger area more evenly. We provide a free, itemised quote after assessing your property.
Ducted gas heating uses a central gas unit to distribute warm air through ductwork, while reverse-cycle systems use the same equipment for both heating and cooling via a heat pump. Reverse-cycle is often more efficient for moderate winters and offers cooling as a bonus, while ducted gas can provide stronger heat output in very cold conditions.
At least once a year, ideally before winter. This is particularly important for gas solutions, where an annual check covers both performance and safety, including gas connections and ventilation.
A faint smell for a short period when a system is first used after months of inactivity can be normal, as dust burns off indoor climate setup elements. However, a persistent gas smell or a strong odour should be treated as urgent — turn the system off and contact a licensed technician immediately.
Yes. Options range from a single gas wall furnace or reverse-cycle split system for one or two rooms, through to a full ducted retrofit for whole-home heating. The right choice depends on the property’s layout and how much of the home needs indoor climate setup.
This is often caused by uneven ductwork airflow, a closed or damaged vent, poor insulation in that specific room, or a zoning setting that’s reducing airflow to that area. A technician can identify the cause during a diagnostic visit.
Hydronic heating offers steady, even warmth without blowing air around the room, which suits people with allergies or a preference for radiant heat. It generally costs more to install than ducted or reverse-cycle systems, so it’s worth weighing the comfort benefits against the higher upfront investment for your specific situation.
Yes. Our licensed technicians handle gas connections and fitting as part of ducted gas heating installations and repairs, completed to Australian Standards and relevant safety regulations.